How Much Do Solid Surface Countertops Cost in Toronto in 2026?

These are not Countertop Installers estimates and they are not a market survey. Every range below rests on 8 independent companies publishing prices on 7 of their own pages, read off those pages in August 2026: Home Depot Canada - Cost to Install a Kitchen Countertop, SolidSurface.ca, Natural Stone City - Ontario countertop cost guide, Stone Masters, Zen Living, CountertopRepair.ca, CountertopRepair.ca - Canada-wide network including Toronto, Toronto General Contractors. Most are GTA fabricators and suppliers, and several are listed in this directory. Read each one as what that company advertises, not as what a job settles at: an advertised range is written to win the work, a real quote is measured on site. Where two companies disagree, each range is published under its own company's name rather than merged into a wider band neither of them quotes.

Far enough that a reader with two quotes should not assume one of them is wrong. The drawing below is the same rows as the table above, one axis per unit, so a square-foot rate is never set against a per cut-out fee. Each bar runs from the low figure that company advertises to its high figure, and the bar is drawn from those two numbers and nothing else. On the per sq ft installed (CAD) figures the two furthest apart are $35–$85 and $60–$180, from SolidSurface.ca, Toronto fabricator since 2001 and Toronto General Contractors (Toronto countertop cost guide). Neither is the market rate, because this site has not got one and has not built one.

Scope drives it more than material does. The list below is ordered by how much each one moves a solid surface countertop quote in Toronto, and every line names the company that published the figure beside it, so you can read a quote and see where the money goes.

• Brand and colour group: Stone Masters names Corian, Gibraltar, Swanstone and Avonite in the same $75-$120 per sq ft band, so the brand badge moves the price less than the fabrication does
• Where the quote comes from: Home Depot Canada's retail programme is $51-$99 per sq ft for Corian while Toronto fabricator SolidSurface.ca publishes $35-$85, a gap of the same order as the whole band
• Undermount sink edge finishing: Home Depot Canada charges $175-$275 each on top, on a stone surface, for finishing the edges of the cut-out
• Integrated seamless sinks: fabricated from the same sheet and chemically bonded rather than dropped in, which is the one thing quartz cannot do at any price. No Canadian source publishes a per-bowl price, so it is quoted per project
• Thermoformed curves and coved backsplashes: the same sheet bent rather than a second piece joined. No Canadian source publishes a rate for it, so treat it as quoted per project
• Kitchen size: Home Depot Canada's national average is $2,400 per job for a 28 square-foot countertop, tax excluded, including edging and cut-outs for one sink and one faucet
• Removal of the old top: Home Depot Canada states removal and disposal of the existing countertop is available for an additional charge, not included in the price above
• Repair over the life of the top: $150-$400 for a single chip or crack and $400-$800 for extensive refinishing (CountertopRepair.ca)

Ontario rules and Toronto's climate change the math in ways national price guides miss. Here is what applies locally, from HST to permits to freeze-thaw.

• Ontario HST is 13 percent, made up of the 5 percent federal GST and an 8 percent provincial portion. Almost every figure on this page is before tax, and Home Depot Canada states its numbers are tax excluded, so a $3,500 kitchen top becomes about $3,955 out the door. Confirm whether a GTA quote is HST-in or HST-extra before comparing two shops.
• GTA labour is the top of the Ontario range. Natural Stone City's 2026 guide shows Toronto and the GTA at $85 to $160 per sq ft installed for mid to premium countertops against $75 to $140 in Ottawa and Eastern Ontario and $70 to $130 in Niagara and Hamilton. Expect solid surface to sit at the upper half of its published band inside the 416 and 905.
• Commercial and institutional work is where Ontario demand holds up. SolidSurface.ca has fabricated solid surface for Toronto medical and dental practices, food service and architectural projects, and markets refinishing specifically so surfaces can be brought back to standard. Mordor Intelligence puts healthcare and office breakrooms among the segments where the material stays relevant in North America, for seamless joints and integrated sinks rather than for price.
• Condo delivery changes the job, not just the price. Tec Corp Stone's Toronto guidance lists freight elevator reservations, restricted working hours, parking coordination and protected carrying routes as normal condo conditions, and buildings commonly ask for contractor insurance and WSIB documentation before a delivery date is confirmed. Solid surface has a real advantage here: pieces can be chemically seamed on site into one continuous top, so the material can arrive as smaller sections that fit the elevator.
• Over the life of the top, repairability is a genuine Ontario cost advantage. CountertopRepair.ca prices a single chip or crack at $150 to $400 and full-surface refinishing at $400 to $800 against a $2,500 to $8,000 or more replacement, and Home Depot Canada puts the expected life at 20 to 30 years with care. Toronto has fabricators doing this work locally, including Solid Surface Toronto Inc in Etobicoke.

You can keep solid surface countertop costs down without cutting the parts that matter. These are the levers GTA homeowners actually use, each tied to a real number above.

• Compare on scope, not on the per-square-foot number. A $50 per sq ft quote and a $99 per sq ft quote can both be honest if one excludes removal, cut-outs, delivery and edge upgrades. Home Depot Canada's $2,400 average for a 28 sq ft top includes edging and cut-outs for one sink and one faucet, and states removal and disposal are an additional charge.
• Get a fabricator quote as well as a retail one. SolidSurface.ca in Toronto publishes $35 to $85 per sq ft installed against Home Depot Canada's $51 to $99 for the same material. On a 45 sq ft kitchen that spread is worth more than the colour, the edge and the sink combined.
• Repair before you replace. CountertopRepair.ca prices a single chip or crack at $150 to $400 and extensive refinishing at $400 to $800, against a replacement it puts at $2,500 to $8,000 or more. Solid surface is the one material where the damage can be sanded out completely, because the colour runs through.
• Skip the undermount edge finishing if you are not committed to it. Home Depot Canada charges $175 to $275 each for finishing the edges of an undermount sink cut-out, on top of the countertop price.
• Put the money into the integrated sink instead. It is the single feature that justifies choosing solid surface over quartz, since quartz cannot do it at any price, and it removes the rim and caulk line where kitchens collect grime. No Canadian company publishes a per-bowl figure, so ask for it as a named line on the quote.
• Book condo deliveries around the building's rules before fabrication starts. Elevator reservations, restricted hours and long carry routes get priced into labour if they surface late, and solid surface can be fabricated in smaller sections and seamed on site to avoid an oversized-handling charge.

From 8 companies' own published pages, and nowhere else. Countertop Installersdid not survey anyone and did not model, average or interpolate a single figure. Every price above was read off a named company's page in August 2026, is reproduced with that company named beside it, and carries the caveat that company attached to it. Several of those companies compete with each other and are listed in this directory, so no single one of these ranges is the market rate. Here is what reconciling them turned up.

• Canadian companies disagree on what solid surface costs, and the honest answer is a wide band. Home Depot Canada lists Solid Surface by Corian at $51 to $99 per sq ft installed. Natural Stone City's Ontario guide says $50 to $120. SolidSurface.ca, a Toronto fabricator, says $35 to $85. Stone Masters in Toronto says $75 to $120. Zen Living's Calgary guide says $85 to $130. Treat $50 to $120 per sq ft installed as the planning band for the GTA and expect the actual quote to depend far more on fabrication detail than on the brand name.
• Residential demand in the GTA has moved to quartz, and the price lists show it. Toronto General Contractors' countertop guide breaks out granite, marble, quartz, laminate, butcher block and Dekton, and does not list solid surface at all. Tec Corp Stone's Toronto cost table does the same. Solid surface now survives on features the stone materials cannot match rather than on price, since Toronto General Contractors' own $60 to $180 per sq ft quartz range overlaps the solid surface band almost completely.
• What solid surface still wins on is seamlessness. It is chemically bondable, so two pieces fuse into a joint that is invisible and cannot be felt, and it is thermoformable, so the same sheet can be bent into a curve, a coved backsplash or a sink bowl. Quartz cannot do an integrated sink at all. That is the feature people are actually buying when they choose this material over stone.
• Repairability is the second reason the material is still specified. Colour runs all the way through, so scratches, burns and stains sand and buff out. CountertopRepair.ca puts a single chip or crack at $150 to $400 and more extensive work, meaning multiple chips, long cracks or full-surface refinishing, at $400 to $800, against a replacement it prices at $2,500 to $8,000 or more. It is a repair company making a repair company's argument, but the two bands are its own published numbers.
• The material's real growth market is commercial. Mordor Intelligence's North America countertop report says solid surface remains relevant in commercial healthcare and office breakrooms where seamless seams and thermosetting fabrication allow integrated sinks and coves. Toronto's SolidSurface.ca runs whole product lines for medical and dental offices, food service and architectural work.
• The honest trade-off: Corian is soft compared with stone, it scorches, and it cannot take an undermounted cooktop. A hot pot set on a seam can pop it open. Home Depot Canada rates its life at 20 to 30 years with simple care, and says avoiding direct heat and cutting straight on the surface is what gets you there. The durability gap against quartz is about daily habits, not lifespan, because the damage that does happen can be sanded out.
• Three prices were removed from this page in August 2026. An integrated sink range, a coved backsplash rate and a commercial-grade installed band were all US figures in US dollars, two of them from cost aggregators. A US price does not convert into a Toronto quote, and SPEC for this site excludes them rather than converting them. They were deleted rather than restated, and no Canadian replacement was invented.

Sources

• Home Depot Canada - Cost to Install a Kitchen Countertop (CAD, tax excluded)
• Home Depot Canada - Solid Surface Countertop Installation
• SolidSurface.ca - Solid Surface Countertops Toronto, cost and market articles
• SolidSurface.ca - Medical and dental solid surface, Toronto
• SolidSurface.ca - Thermoforming
• Solid Surface Toronto Inc - Corian fabrication, repairs and refinishing, Etobicoke since 1996
• Natural Stone City - Countertop Cost Guide, Ontario (2026)
• Stone Masters - Inexpensive Kitchen Countertop Options, Toronto
• Toronto General Contractors - What Is the Cost of Kitchen Countertops in Toronto (Nov 17, 2025)
• TecCorp Group - Kitchen Countertop Cost in Toronto (condo and kitchen-size ranges)
• CountertopRepair.ca - Countertop repair, restoration and refinishing across Canada
• Zen Living - Countertop Replacement Costs in 2025 (Calgary, CAD)
• Mordor Intelligence - North America Countertop Market (2026-2031)
• Xero Canada - Ontario sales tax: 13% HST guide (published May 27, 2026)

Countertop Installers tracks 8 solid surface countertop installers across the Greater Toronto Area, rated 4.92★ on average. The three below rank highest on one published score out of 100, based on Countertop Installers' analysis of 8 GTA businesses, August 2026.

• 

  

  

  01HardFlex Solid Surfaces

  5.0out of 513 reviews

  7634 Kimbel St unit 26 27, Mississauga·Kitchen Renovation

  67/100 Countertop Installers Score

  Newest review

  5 years ago

  Open

  6 days a week

  Photos

  3 on file

  Request a quote
• 

  

  

  02Solid Source Corporation

  5.0out of 58 reviews

  1070 Kamato Rd Unit 3, Mississauga·Marble Countertops

  65/100 Countertop Installers Score

  Newest review

  5 years ago

  Open

  5 days a week

  Photos

  4 on file

  Request a quote
• 

  

  

  03ACF Surfaces Inc

  4.9out of 538 reviews

  354 MacNab St Unit B, Dundas·Countertop Installation

  65/100 Countertop Installers Score

  Newest review

  a year ago

  Open

  5 days a week

  Photos

  4 on file

  Request a quote

Like this. Every photograph below was taken by the shop under it, of a job that shop did, and it links through to that shop's profile. Countertop Installers holds 3,205 of these across 869 businesses and took none of them. A finished edge, a seam you can or cannot see, and how a slab meets a cabinet run are the things a quote is actually about, and they are quicker to judge in a photograph than in a paragraph.

• 

  HardFlex Solid Surfaces, Mississauga

• 

  Solid Source Corporation, Mississauga

• 

  ACF Surfaces Inc, Dundas

• 

  Solid Carved Surfaces, Mississauga

• 

  Solid Surface Canada, Scarborough

• 

  Corian Pros - Solid Surface Fabricators, Scarborough

• 

  Willis Supply Co. Ltd., Burlington

• 

  Northbound Solid Surface Inc., Richmond Hill

Yes, and without giving anyone an email address first. A published range tells you the shape of the price; these put your own measurements against the same researched figures, line by line.

• Which material suits your kitchenSeven questions that rule materials out on physical properties rather than scoring them, then rank whatever survives by published price.Open the tool
• Cost by materialOne kitchen priced in seven materials at once, cheapest to dearest, with the gap between them in dollars rather than per square foot.Open the tool
• Square footage calculatorOne row per straight run, because a kitchen counter is not one rectangle. Returns square feet, linear feet and square metres.Open the tool

These are the words that decide what a number covers. Each one is defined here because this guide uses it above, not because a glossary needs filling.

Undermount cut-out

An opening cut so the sink hangs below the surface rather than sitting on it. The cut edge stays visible, so it is polished as a separate charge, which is why undermount costs more than a drop-in.

Supplied versus installed

The first question to ask of any countertop price. A supplied figure is the material delivered and nothing else; an installed figure covers templating, fabrication and fitting as well. The two are quoted in the same units and the same currency and routinely differ by more than any upgrade on the job, which is why two quotes on one kitchen can look thousands apart while describing identical work.

Integrated sink

A bowl made from the same sheet as the counter and bonded to it, so there is no rim, no seal and no joint to fail. Solid surface and cultured marble can do it and stone cannot at any price, which is a large part of what a solid surface quote is buying.

Thermoforming

Heating a solid surface sheet until it can be bent, then holding the shape as it cools. It is how a coved backsplash or a curved counter front is made from one continuous piece rather than assembled from two, and no Canadian supplier publishes a rate for it, so it is quoted per project.

These three quote the most fabricators in common with this page, so they are the ones that let you check a number against a second material or a second scope.

• Laminate Countertops cost guideRead the guide
• Butcher Block Countertops cost guideRead the guide
• Porcelain Countertops cost guideRead the guide

Or read it against one other material at a time. One comparison on this site reads the same price rows as this guide and sets them line by line against another material: solid surface vs quartz countertops.